3D Printed Trophies for the Australian Manufacturing Awards
October 30, 2026
Giving 3D Printed Trophies a Premium Finish
A national manufacturing award needs a trophy that looks the part. When the body of that trophy is 3D printed in nylon, the surface straight off the printer has a fine, grainy texture that doesn’t match the premium finish people expect from an award.
That was the challenge with the 2026 Australian Manufacturing Awards trophies. Formero vapour smoothed the 3D-printed trophy bodies, sealing and smoothing the surface to give them a finish suited to a national awards program.
How the trophy project started
Industry Update, the organiser of the Australian Manufacturing Awards, approached Swinburne University of Technology’s Manufacturing Futures Research Platform (MFRP) to explore how advanced manufacturing could be built into the design and production of the trophies.
The aim was to keep the familiar look of the trophies while creating something that reflected the innovation happening in Australian manufacturing today. With support from the Additive Manufacturing Cooperative Research Centre (AMCRC) and several Victorian manufacturers, the Swinburne team developed a hybrid approach combining 3D printing, precision machining and specialist finishing.
You can read Industry Update’s full article on the trophies.

Three manufacturing processes in one trophy
The trophy bodies were 3D printed in nylon using Multi Jet Fusion (MJF), with Swinburne’s Protolab developing and producing the printed components. MJF gave the speed, consistency and cost control needed for a small production run.
The design uses lattice structures and walls as thin as 1 mm. These are features that would be costly and impractical to produce with traditional manufacturing methods.
Local manufacturers machined and anodised the metal bases, which were then engraved. The finished trophies come in two versions, gold and silver.
Why the trophy bodies were vapour smoothed
MJF parts come off the printer with a slightly grainy, porous surface. That suits many functional parts, but it isn’t the finish you want on a trophy that sits beside an anodised metal base and will be handled, photographed and displayed.
We vapour-smoothed 20 trophy bodies at our Melbourne facility. Vapour smoothing uses a controlled vapour to soften and reflow the outer surface of the part. As the surface resets, it seals the porosity and removes the grainy texture, without adding any material or coating.
Because the process works through vapour rather than by hand, it reaches the whole surface of the lattice, including areas that can’t be sanded or polished manually.
The result is a smooth, consistent finish that closely resembles injection moulded plastic. With nothing added to the surface, there’s no coating to chip or wear off with handling. The sealed surface is also easier to keep clean and better resists moisture, both useful for an object that will stay on display for years.

A collaborative Australian effort
Professor Suresh Palanisamy, MFRP Director and AMCRC Innovation Taskforce Chair, made the point that additive manufacturing isn’t about 3D printing everything. It’s about understanding the material, the application and the design requirements, then choosing the right technology for the job.
That’s how we approach every project. We run several 3D printing technologies in-house so we can recommend the process that suits the part, not the one we’re tied to.
AMCRC Managing Director Simon Marriott noted that what makes the trophies interesting isn’t simply that they’re 3D printed. It’s that several Australian organisations brought different technologies, expertise and processes together to get the best result.
From printing to machining and finishing, every stage of the trophies was completed in Australia.

3D printed trophies and awards from Formero
If you have a trophy or award design, we can 3D print it in Melbourne using the process that best suits your design and the finish you’re after.
- MJF and SLS: durable nylon parts, well suited to lattice structures and complex shapes, with vapour smoothing available for a sealed, smooth finish.
- SLA: high-detail parts with a smooth surface, including clear parts.
- MSLA: fine detail across a range of resins, from tough to flexible and high-temperature.
- Figure 4 (DLP): crisp detail and smooth surfaces, including black materials.
Our post-processing services let you finish the job in one place, with options including Pantone-matched spray painting, dyeing, clear lacquer, threaded inserts and assembly. We also produce presentation models for exhibitions, trade shows and marketing.
Upload your files to our online quoting and ordering system for an instant quote, or contact our team on +61 3 8899 7280 or sales@formero.com.au to talk through your trophy project.
Speak with us today.
Author
Craig Alexander
Craig leads the marketing and brand strategy at Formero, where he communicates complex manufacturing capabilities in a clear and practical way. He works across Formero’s advanced manufacturing services to create content that informs, educates, and supports engineers, designers, and procurement teams in making confident production decisions.
